2025 Chevrolet Blazer Oil Change

$79–$129 at Larry H. Miller Chevrolet Murray, before tax and shop supplies.

This range reflects full-synthetic, GM-spec dexos1 oil and a quality filter for the 2.0L turbo engine. Your visit also includes a multi-point inspection, fluid top-offs, and proper recycling/disposal. For seasonal savings near Salt Lake City, check our service offers before you book.

• Transparent estimates with no surprise add-ons
• OEM-spec oil and filter chosen for the 2025 Chevrolet Blazer
• See current service specials for potential discounts

Plan on 45–60 minutes for a standard oil and filter change with an appointment.

Timing can vary based on shop volume and requested add-on services, but most Blazer oil changes in Murray are completed in under an hour. Booking online helps us reserve a bay and minimize your wait. We’ll also reset the Oil Life Monitor and review the inspection findings with you.

• Same-day service available with scheduled appointments
• Includes OLM reset and multi-point inspection
• Reserve your spot: schedule service

Every 7,500 miles under normal use, or sooner per the GM Oil Life Monitor; target 5,000 miles for severe Utah conditions.

Cold starts, dust from canyon roads, frequent short trips, and towing along the Wasatch Front count as severe duty and shorten intervals. Always follow the Oil Life Monitor and your owner’s manual for the most accurate timing for your 2.0L turbo Blazer.

• Normal: ~7,500 miles or OLM prompt
• Severe duty (cold, dust, towing, short trips): ~5,000 miles
• Book now to stay on schedule: schedule service

GM dexos1 Gen 3 full-synthetic 0W-20 motor oil is specified for the 2.0L turbo engine.

This oil balances cold-start pumpability for Murray winters with high‑temperature stability for mountain climbs. Using dexos1-approved oil and a quality filter helps protect the turbocharger and maintain efficiency. Check your owner’s manual for confirmation and any updates.

• Use dexos1 Gen 3 full-synthetic 0W-20
• Protects the turbo and supports fuel economy
• OEM-spec oil and filter installed here in Murray

The 2.0L turbo inline-4 takes 5.3 quarts with a new filter.

After refilling, technicians verify the level on the dipstick and confirm no leaks at the drain plug and filter. Capacity can vary slightly with residual oil, so the final check is important. We also reset the Oil Life Monitor and review your inspection results.

• Approximate capacity: 5.3 quarts with filter
• Engine: 2.0L turbo (inline-4), code 4ITCG2.0
• Level confirmed after warm restart and short idle

Yes—dealer service uses OEM-spec dexos1 full-synthetic oil and a GM-quality filter, plus a multi-point inspection.

Quick-lube shops can be convenient, but our team follows GM procedures for your 2025 Chevrolet Blazer and checks for open campaigns. You also get documentation that supports warranty compliance. Choose the option that best fits your needs and service record goals.

• OEM-spec parts and fluids documented on your RO
• Multi-point inspection and fluid top-offs included
• Factory-trained, OEM-certified technicians in Murray

Skipping required oil changes can jeopardize coverage if you exceed the GM Oil Life Monitor and lack service records.

GM expects you to follow the maintenance schedule and keep receipts. Warranty work generally requires a certified facility and proof of proper maintenance. If you’re behind, get current and save your documentation.

• Follow OLM prompts and your owner’s manual
• Keep dated invoices and mileage records
• Book a catch-up visit: schedule appointment

Full synthetic offers superior high-temp stability and cold-flow; blends mix synthetic and conventional; conventional is mineral-based.

For the Blazer’s turbocharged 2.0L, GM specifies dexos1 Gen 3 full-synthetic for better oxidation control and turbo protection. In Utah’s winter cold and summer heat, full synthetic maintains viscosity more reliably. Always match the dexos1 spec on the bottle.

• Use dexos1 Gen 3 full-synthetic for the 2025 Blazer
• Better protection under turbo heat and cold starts
• Consult your manual for the exact viscosity

Larry H. Miller Chevrolet Murray at 5500 S State St, Murray, UT 84107 performs OEM-spec oil changes.

We serve the greater Salt Lake City area—including South Jordan, West Jordan, Midvale, and Sandy—with Chevy-trained technicians. Book online for quick check-in and see current offers before you arrive.

• Address: 5500 S State St, Murray, UT 84107
• Easy online booking: schedule service
• See service specials for savings

Your 2025 Chevrolet Blazer oil service is performed by factory-trained, OEM-certified technicians using GM-approved dexos1 full-synthetic oil and a quality filter. We start by confirming your VIN and maintenance history, then drain the engine oil and replace the filter. Fresh oil is filled to spec, the engine is run and checked for leaks, and the dipstick is rechecked for final level. A multi-point inspection reviews tires, brakes, battery health, belts/hoses, and visible leaks. We top off fluids, set tire pressures, and reset the Oil Life Monitor. Clear notes document any findings so you can decide next steps with confidence. Following the factory schedule helps protect performance and warranty eligibility. Ready to go? Book now: schedule service or review service specials.

The 2025 Chevrolet Blazer with the 2.0L turbocharged inline‑4 (engine code 4ITCG2.0) is designed for GM dexos1 Gen 3 full‑synthetic 0W‑20 motor oil. Capacity is approximately 5.3 quarts with a new filter, verified by dipstick after warm restart. Under normal driving, plan oil changes at about 7,500 miles or when the Oil Life Monitor calls for service; in severe conditions—cold starts, dust, towing, short trips—target roughly 5,000 miles. A GM‑quality oil filter is recommended to maintain proper flow and filtration for turbo health. Monitor for any unusual consumption or dashboard alerts and address promptly to protect the turbo and emissions systems. Bring your 2025 Chevrolet Blazer to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

We proudly serve the greater Salt Lake City area—including South Jordan, West Jordan, Midvale, and Sandy—with oil changes tailored to Utah’s climate. Cold winter mornings demand oil that flows quickly at startup, while summer heat, canyon dust, and stop‑and‑go I‑15 traffic stress viscosity and filtration. If you tow or make frequent short trips, consider the severe‑duty interval to keep your 2.0L turbo performing its best. Our Chevy-trained technicians follow GM procedures, check for open campaigns, and document every visit for your records. Find us at 5500 S State St, Murray, UT 84107. Get directions, lock in your time, and review offers before you arrive: schedule service and see service specials.