2024 Chevrolet Colorado Oil Change in Murray, UT

Most dealer oil changes for a 2024 Chevrolet Colorado take about 45–60 minutes.

Plan on roughly an hour for check-in, oil and filter replacement, and a multi-point inspection. Our Murray location is built for efficiency and accuracy, using OEM procedures for the 2.7L inline-4. If you’re adding tire rotation or inspections, please allow additional time. You can pick a time slot online and wait in our lounge or drop the truck and return later.

• Book a time: schedule service
• Address: 5500 S State St, Murray, UT 84107
• Nearby: South Jordan, West Jordan, Midvale, Sandy

Change the oil when the Oil Life Monitoring System indicates, typically around 7,500 miles or 12 months; shorten to about 5,000 miles for severe duty.

Utah driving can be severe if you tow, idle in traffic, or face dusty canyon conditions. The truck’s monitor accounts for temperature, trips, and load to time changes accurately. If you often tow (Colorado is rated up to 7,700 lbs) or commute in stop-and-go along State Street, use the shorter interval to protect the turbocharged 2.7L engine.

• Follow the dash Oil Life Monitoring alerts
• Severe duty: towing, dust, short trips, cold starts
• Questions? schedule service

Use GM dexos1 Gen 3 0W-20 full-synthetic oil for the 2.7L engine.

This viscosity provides fast cold-start protection for Wasatch Front winters and stable film strength under heat when towing or climbing grades. Full-synthetic oil that meets the dexos1 Gen 3 standard helps control deposits and protects timing components and the turbocharger. We install OEM-spec oil and an ACDelco filter to maintain performance and warranty compliance.

• Viscosity: 0W-20 (dexos1 Gen 3)
• Oil type: full synthetic only
• Get it done right: schedule appointment

The 2.7L inline-4 in a 2024 Chevrolet Colorado holds about 6.0 quarts with a filter change.

After draining and replacing the filter, we add the specified amount of dexos-approved 0W-20 and verify the level once the engine circulates oil. Accurate fill is key for proper pressure and turbo lubrication, especially if you tow or drive mountain passes. We recycle old oil and provide documentation for your maintenance records.

• Approximate capacity: ~6.0 quarts with filter
• Spec: dexos1 Gen 3 0W-20 full synthetic
• Check for leaks and final level before delivery

Yes—dealer service uses OEM-spec dexos oil and an ACDelco filter, plus a documented multi-point inspection.

Quick-lube shops can be convenient, but your truck benefits from factory-trained technicians, software updates when applicable, and service records tied to your VIN. At Larry H. Miller Chevrolet Murray, we follow GM procedures suited to Utah’s climate and your usage (towing, dust, cold starts). You decide based on your priorities—speed, documentation, and OEM parts.

• OEM-spec oil/filter and torque specs
• Inspection and fluid top-offs included
• Easy online booking: schedule service

Skipping or delaying oil changes can lead to warranty denial on related repairs if you exceed the recommended schedule or lack service records.

GM requires maintenance be performed per the Oil Life Monitoring System and documented. Keep receipts showing dexos-approved oil and an OEM-quality filter were used. Warranty work generally requires a certified facility, and proof of proper maintenance helps protect coverage for engine and turbo components.

• Follow OLM alerts or time/mileage limits
• Save invoices with date, mileage, oil spec
• Service by factory-trained technicians is recommended

Chevrolet specifies full-synthetic 0W-20 meeting GM dexos1 Gen 3; conventional oil isn’t approved for this turbo 2.7L.

Full synthetic resists heat, shearing, and deposits better than conventional or blends—important for turbochargers and Utah’s hot/cold swings. Using the correct dexos-approved oil helps maintain timing-chain health and reduces LSPI risk. Blends and conventional oils may not meet dexos1 Gen 3 performance requirements.

• Required: dexos1 Gen 3 0W-20 full synthetic
• Enhanced protection for turbo and cold starts
• See service specials

Yes—the online service scheduler at /service/scheduler.htm lets you choose a date and time in Murray, UT.

Pick a slot that fits your day, add notes about towing or driving conditions, and we’ll prepare the correct dexos oil and OEM filter for your visit. Our location serves the greater Salt Lake City area with convenient access from I-15 and State Street. You can also check current offers before booking.

• Book now: schedule service
• Offers: service specials
• Visit: 5500 S State St, Murray, UT 84107

We proudly serve the greater Salt Lake City area—including South Jordan, West Jordan, Midvale, and Sandy—with oil services tailored to local driving. Utah’s climate swings demand oil that flows quickly on cold mornings yet protects during hot canyon climbs and towing. Dust from summer construction and stop-and-go along State Street can qualify as severe duty, making timely oil changes essential for the 2.7L inline-4. Our factory-trained team follows GM procedures, installs dexos-approved full-synthetic 0W-20, and documents every visit for your records. Find us at 5500 S State St, Murray, UT 84107. To plan ahead and minimize downtime, pick your time online and review current offers.

Schedule service or browse service specials.

Our oil service is systematic and transparent. After check-in, we verify VIN and mileage, then drain the used oil and replace the crush washer if required. An OEM-quality ACDelco filter is installed, and we fill with dexos1 Gen 3 0W-20 full-synthetic oil to the proper capacity. A multi-point inspection checks tires, brakes, battery, belts, and visible leaks. We top off fluids, set tire pressures to door-jamb spec, reset the Oil Life Monitoring System, and road-test as needed. Your invoice lists the oil spec and quantity for maintenance records. If you tow, commute daily, or drive canyons, ask us about a severe-duty interval tailored to your use. Ready for next steps?

Schedule service and review service specials before you arrive.

Viscosity: dexos1 Gen 3 0W-20 full synthetic is specified for the 2.7L inline-4 to balance cold-start pumpability and high-temperature protection. Capacity: approximately 6.0 quarts with a filter change; we verify on the dipstick after circulation. Filter: OEM ACDelco filter specified for the 2.7L (see owner’s manual or parts catalog for the exact part number). Interval: follow the truck’s Oil Life Monitoring System; under severe duty—frequent towing, dust, short trips, or extreme temps—use a shorter interval to protect the turbo and timing components. Documentation matters for warranty support, so keep your receipts with mileage and oil spec noted. Bring your 2024 Chevrolet Colorado to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.