2020 Chevrolet Traverse Oil Change

Expect a full-synthetic, OEM-spec oil change for a 2020 Chevrolet Traverse to be priced as a transparent, up-front range at Larry H. Miller Chevrolet Murray (see our online service scheduler for your exact total).

Pricing is provided before you book, and it reflects Chevrolet-approved oil and an OEM-quality filter for your 3.6L V6. You’ll also receive a multi-point inspection and proper oil-life monitor reset, which many quick-lube shops may not include. Check our current service specials for potential savings, then schedule service to lock in your time.

• Up-front total shown when you schedule online
• Includes OEM-spec oil/filter, disposal, and inspection
• See local deals on our service specials page

A typical dealer oil change for a 2020 Chevrolet Traverse is completed in about 45–60 minutes, including inspection and paperwork.

Plan for roughly an hour when you visit Larry H. Miller Chevrolet Murray, allowing time for check-in, the oil and filter service, a multi-point inspection, and OLM reset. Early drop-off and online booking help minimize wait times. If you’re on a tight schedule, choose an open slot that fits your day in our schedule service tool.

• Service window: roughly 45–60 minutes
• Time includes inspection and OLM reset
• Book a precise time via online scheduling

Follow the vehicle’s Oil Life Monitoring System for your 2020 Chevrolet Traverse, and service at least annually even if you drive fewer miles.

GM’s OLM accounts for temperature, starts, and driving style to determine the right time for service. In Utah’s mix of cold mornings, summer heat, and canyon dust, many drivers see shorter intervals; towing and stop‑and‑go traffic can also accelerate oil degradation. If the OLM hasn’t triggered, changing oil once a year helps keep your 3.6L V6 protected.

• Service when the OLM indicates or at least once per year
• Severe conditions (dust, towing, short trips) shorten intervals
• Schedule service when the OLM light appears

The 2020 Chevrolet Traverse requires engine oil that meets GM dexos1 specifications, typically a full-synthetic SAE 0W‑20.

Chevrolet designs the 3.6L V6 for low‑viscosity, dexos1‑approved oil to optimize cold‑start protection and fuel economy. Using non‑approved oil can affect performance and may complicate warranty claims. Our team installs dexos1-approved full synthetic and an OEM-quality filter, then resets the OLM to keep maintenance tracking accurate.

• GM dexos1 approval is required
• Common recommendation: full‑synthetic SAE 0W‑20
• We install OEM-quality filters and reset the OLM

The 2020 Chevrolet Traverse 3.6L V6 takes approximately 6.0 quarts of engine oil with a filter change.

Capacity can vary slightly by filter used and draining time, so our technicians fill to spec and confirm level on the dipstick before resetting the OLM. Using the correct quantity prevents aeration and ensures proper lubrication on steep Wasatch grades and highway speeds between Murray and the greater Salt Lake City area.

• Approximate capacity: 6.0 quarts with filter
• Level verified after fill and engine run
• Schedule service for an OEM-spec fill

Yes—dealer service uses GM dexos1-approved oil, an OEM-quality filter, and includes a multi-point inspection calibrated to your 2020 Chevrolet Traverse.

Quick‑lube shops can be convenient, but dealership technicians have model‑specific training and access to service bulletins. You also get the correct oil spec, OLM reset, and a check for open campaigns. Compare value, not just price, and review our service specials before you schedule.

• OEM-spec oil and filter installed
• Model‑specific multi-point inspection
• OLM reset and checks for current updates

Skipping required oil changes can lead to denial of engine-related warranty claims if a failure is linked to lack of maintenance.

Keep dated receipts and follow the OLM to document compliance with Chevrolet’s maintenance schedule. Warranty work generally requires a certified facility, and using oil that meets GM dexos1 specifications helps avoid disputes. If you self‑maintain, keep detailed records; if you prefer certainty, book at Larry H. Miller Chevrolet Murray.

• Maintenance records protect coverage
• Use dexos1-approved oil and OEM-quality filters
• Schedule service for maintenance documentation

For a 2020 Chevrolet Traverse, Chevrolet specifies dexos1-approved full synthetic oil, which outperforms conventional and blends in volatility, cleanliness, and cold-start protection.

Full synthetics resist breakdown better on hot summer climbs and flow faster on freezing mornings along the Wasatch Front. Conventional oil isn’t approved for most late-model GM gasoline engines, and many blends still don’t meet dexos1 standards. Always match the bottle to dexos1 and the viscosity shown in your owner’s manual.

• Use dexos1-approved full synthetic
• Improved cold-start and high-temp stability
• Check the label for dexos1 compliance

Get your 2020 Chevrolet Traverse oil change at Larry H. Miller Chevrolet Murray, 5500 S State St, Murray, UT 84107.

We serve the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy, with OEM-spec oil, filters, and Chevrolet-trained technicians. Book a time online, and don’t forget to review our service specials before you come in.

• Address: 5500 S State St, Murray, UT 84107
• Schedule your appointment online
• Local coverage: SLC, South/West Jordan, Midvale, Sandy

Our oil service for the 2020 Chevrolet Traverse follows Chevrolets procedures step by step. After verifying your VIN and mileage, we drain the engine oil, replace the oil filter with an OEM-quality part, and install dexos1-approved full-synthetic oil at the specified viscosity. We then reset the Oil Life Monitoring System (OLM), inspect for leaks, and confirm the level on the dipstick after running the engine. A multi-point inspection reviews brakes, tires, steering and suspension components, belts and hoses, battery health, and visible leaks. We top off essential fluids and set tire pressures to the door-jamb specification. You leave with digital or printed documentation of work performed. Ready for factory-correct care? Use our online tool to schedule service today.

The 2020 Chevrolet Traverse 3.6L V6 is engineered for GM dexos1-approved full-synthetic engine oil, commonly SAE 0W-20, to balance cold-start pumpability with high-temperature film strength. The engine requires approximately 6.0 quarts with a filter change; we always verify the level after fill and reset the OLM. An OEM-quality (ACDelco-equivalent) oil filter is recommended for proper bypass and anti-drainback performance. Follow your OLM for service timing, and consider shorter intervals when driving in dust, towing over mountain passes, or taking frequent short trips in cold weather. Bring your 2020 Chevrolet Traverse to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

LHM Chevy Murray serves the Wasatch Fronts varied driving: cold winter starts, dry canyon dust, highway runs on I-15, and stop-and-go around Salt Lake City. We support nearby communities including South Jordan, West Jordan, Midvale, and Sandy with Chevrolet-trained technicians and OEM-spec fluids that meet dexos1 requirements. Proper oil viscosity helps the Traverses 3.6L V6 start cleanly on freezing mornings, while full-synthetic stability resists breakdown on summer climbs. You can review service specials, book a time with our schedule service tool, and find us easily at 5500 S State St, Murray, UT 84107. If you prefer minimal wait time, choose an appointment window online and arrive a few minutes early for check-in.