2020 Chevrolet Blazer Oil Change in Murray, UT

Your 2020 Chevrolet Blazer uses a factory Oil Life Monitoring System (OLMS) to determine when an oil change is due.

The OLMS accounts for driving style, trips over Utah mountain passes, and stop-and-go traffic around Salt Lake City. Follow the indicator on your dash and your owner’s manual guidance to keep the 3.6L V6 protected. If you drive in severe conditions, you may see oil-change prompts sooner. Book an appointment and we’ll reset the OLMS after service.

• OLMS adjusts intervals based on real-world driving
• Service includes post-change OLMS reset and documentation
• Schedule service when the indicator appears

Chevrolet specifies OEM-standard engine oil for the 2020 Chevrolet Blazer; we fill the exact factory-required grade verified by your VIN.

Using the correct oil protects your 3.6L V6 (engine code 6VNAG3.6) and supports proper operation of the Oil Life Monitoring System. Our technicians select oil that meets Chevrolet’s factory specification and install an OEM-quality filter. This helps maintain performance and supports warranty compliance when paired with proper documentation.

• VIN-based oil grade selection for accuracy
• OEM-quality filter installed with each change
• Service record provided for your maintenance file

We fill your 2020 Chevrolet Blazer to the precise factory capacity and confirm level after warm-up.

Correct fill is vital for the 3.6L V6’s lubrication, variable valve timing, and overall longevity. Our team references Chevrolet service information, replaces the drain seal as needed, and verifies the dipstick level after the engine reaches operating temperature. You leave with documentation of the fill and filter used.

• Factory capacity confirmed by VIN and service data
• New drain gasket installed where applicable
• Warm-level check ensures no over/under-fill

Dealer oil changes at Larry H. Miller Chevrolet Murray include OEM-spec oil and an OEM-quality filter, plus a professional inspection.

Our factory-trained team uses genuine Chevrolet parts and follows model-specific procedures for your Blazer. Service records are logged for future warranty needs, and we check for leaks, update reminders, and review maintenance items during the visit. Quick-lube shops may be faster for basic service, but they may not use OEM-grade components or check for Chevrolet-specific updates.

• OEM-spec oil and filter installed
• Multi-point check and fluid top-offs included
• Schedule an appointment for professional care

Warranty coverage generally requires following the manufacturer’s maintenance schedule and keeping service records.

Missing oil changes or lacking documentation can jeopardize coverage if a related failure occurs. Keep receipts and repair orders for each service. Warranty work typically requires diagnosis and repair by a certified facility, which we provide in Murray with OEM parts and procedures.

• Maintain records to document timely oil changes
• Follow the OLMS and owner’s manual guidance
• Certified diagnosis and OEM parts support warranty work

Full synthetic oil provides better high-temperature protection and cold-start performance than conventional and blends.

Those advantages matter for Wasatch Front temperature swings and long highway climbs near Salt Lake City. We match oil to Chevrolet’s factory standard for your Blazer and your driving profile. This helps resist deposits, stabilize viscosity, and keep the Oil Life Monitoring System accurate.

• Improved oxidation resistance and cleanliness
• Stronger low-temp flow for winter cold starts
• Meets Chevrolet’s factory oil performance criteria

Most appointments are completed the same day when you book ahead at Larry H. Miller Chevrolet Murray.

Scheduling in advance helps our team stage OEM parts and keep your visit efficient. While actual time varies with shop load and inspections, we’ll communicate ETAs and keep you updated. Use our online scheduler for real-time availability and notes about your Blazer.

• Book online for fastest check-in
• Same-day completion targeted for routine oil service
• Service updates provided during your visit

Pricing varies by oil specification and filter; request a real-time quote from Larry H. Miller Chevrolet Murray online.

Your 2020 Chevrolet Blazer’s 3.6L V6 may require different oil than other engines, so we confirm the exact grade by VIN before quoting. You’ll see up-front pricing, and we’ll apply available offers. Check our current deals before you book.

• VIN-verified estimate for accuracy
• Transparent, itemized pricing before work begins
• See current service specials for savings

Your service begins with verification of your 2020 Chevrolet Blazer’s engine and oil specification by VIN. We drain the used oil, install a new OEM-quality oil filter, and refill with the exact oil that meets Chevrolet’s factory standard. Technicians torque the drain plug with a fresh seal (where applicable), start the engine, and check for leaks. We reset your Oil Life Monitoring System, top off fluids, set tire pressures, and perform a multi-point inspection so you leave with a clear picture of vehicle health. All used oil and filters are recycled responsibly, and you receive a detailed repair order for your records. Ready to book? Schedule service now or review service specials.

The 2020 Chevrolet Blazer’s 3.6-liter V6 (engine code 6VNAG3.6) benefits from the correct OEM-spec oil paired with an OEM-quality filter to safeguard cam phasing, bearings, and chain lubrication. Our team references Chevrolet service data to select the right oil formulation and quantity for your exact configuration, then confirms level at operating temperature. Follow your owner’s manual and the vehicle’s Oil Life Monitoring System for timing; severe use such as frequent short trips, dusty conditions, or towing can shorten intervals. If you’ve noticed any oil-related warnings or seepage, ask us to inspect gaskets and the filter housing during your visit. Bring your 2020 Chevrolet Blazer to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

LHM Chevy Murray serves the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy, with professional oil service tailored to local driving. Seasonal temperature swings along the Wasatch Front, canyon grades, and urban stop-and-go can accelerate oil degradation, so staying current helps your Blazer’s V6 deliver its 308 horsepower reliably. Our factory-trained, OEM-certified mechanics use genuine Chevrolet parts and document each visit for your maintenance history. Find us at 5500 S State St, Murray, UT 84107, and use our online tools to secure an appointment time that fits your day. Have a question before you come in? Check service specials and schedule your appointment online.