2019 Chevrolet Blazer Oil Change in Murray, UT

The oil change price for a 2019 Chevrolet Blazer at Larry H. Miller Chevrolet Murray typically ranges from ${{vehicle.real_oil_change_price_range_usd.min}} to ${{vehicle.real_oil_change_price_range_usd.max}} with up-front pricing.

This estimate reflects GM-spec oil and an OEM-quality filter, performed by factory-trained technicians in Murray, UT. Your final price can vary based on oil type and any additional services you approve. Check our current offers before you book.

• Includes OEM-spec oil ({{vehicle.oem_oil_spec}}) and an OEM-quality filter
• Multi-point inspection and fluid top-offs are typically included
• See our service specials for potential savings

Most dealership oil changes for a 2019 Chevrolet Blazer take about {{service.duration_minutes}} minutes.

Timing can vary slightly based on shop volume and whether you add services like a tire rotation. Scheduling an appointment helps us start on time and finish efficiently. You can reserve a slot online anytime.

• Plan approximately {{service.duration_minutes}} minutes, curb-to-curb
• Add time if combining services or during peak hours
• Schedule service to lock in your preferred time

Follow the OEM interval of {{vehicle.oem_oil_interval_miles}} miles (or as indicated by the Oil Life Monitoring System) for a 2019 Chevrolet Blazer.

Utah’s mix of temperature swings, elevation, and dust can qualify as “severe duty,” so more frequent service may be prudent if you tow, idle often, or make short trips. We’ll document each visit to help protect warranty coverage.

• Severe-duty factors: towing, heavy loads, dusty roads, frequent short trips
• Use OEM-spec oil per {{vehicle.oem_oil_spec}} for best protection
• Book now via our online scheduler

The 2019 Chevrolet Blazer requires {{vehicle.oem_oil_spec}} per GM specifications.

Using the correct viscosity and GM-approved formulation helps ensure proper cold-start flow in winter and film strength during summer canyon climbs. We install the OEM-quality filter engineered for your engine and reset the Oil Life System after service.

• Correct viscosity and certification: {{vehicle.oem_oil_spec}}
• Optimized for cold-start pumpability and high-temp protection
• Installed with an OEM-quality filter to maintain performance

The 2019 Chevrolet Blazer holds {{vehicle.oil_capacity_quarts}} quarts of oil with a filter change.

We measure precise fill levels after replacing the filter, then confirm via dipstick and the vehicle’s monitors. Proper capacity prevents aeration, low oil pressure warnings, and premature wear over Utah’s mixed driving conditions.

• Capacity: {{vehicle.oil_capacity_quarts}} quarts (with filter)
• Level verified warm and on level ground after service
• Used oil is recycled/disposed of per EPA guidelines

Dealer service uses OEM-spec oil and filter and includes a documented multi-point inspection to help preserve warranty eligibility.

Quick-lube shops may be faster or lower cost for conventional oil, but your Chevrolet benefits from GM-approved fluids, trained technicians, and service records tied to your VIN. You can decide based on your priorities for documentation, parts quality, and convenience.

• OEM-spec oil/filter installed to GM standards
• Service documented to support warranty claims
• Access to service specials and recall/TSB checks

Skipping or exceeding the {{vehicle.oem_oil_interval_miles}}-mile oil interval can lead to denial of related warranty claims per {{rooftop.warranty_terms.oil_change}}.

Keep dated receipts and repair orders that show mileage, oil spec, and the VIN. Warranty work generally requires a certified facility; our team follows GM procedures and retains digital records to help you document compliance.

• Follow the OEM schedule and Oil Life Monitoring System
• Save service records and parts receipts
• Use a certified facility for warranty-related work

GM specifies {{vehicle.oem_oil_spec}} for this engine; full synthetic typically resists heat and cold better than conventional oil.

Conventional oil can shear faster under high load, while blends add stability. Full synthetic maintains viscosity during Utah’s temperature swings and extended highway climbs. Always match the exact GM approval and viscosity printed in your owner’s manual.

• Conventional: lowest cost, least oxidation resistance
• Synthetic blend: improved stability vs. conventional
• Full synthetic: best cold-flow and high-temp protection

Our oil service is engineered around your 2019 Chevrolet Blazer and GM’s published standards. After verifying your VIN and mileage, we drain the old oil, replace the drain seal as needed, and install an OEM-quality oil filter. We then fill with the correct {{vehicle.oem_oil_spec}}, set the precise level ({{vehicle.oil_capacity_quarts}} quarts with filter in most cases), and reset the Oil Life Monitoring System. A multi-point inspection checks tires, brakes, battery health, belts/hoses, and visible leaks. Fluids are topped off, and tire pressures are set to the door-jamb spec. Per {{rooftop.warranty_terms.oil_change}}, we capture documentation to support warranty compliance. Ready to go? Schedule service or call {{rooftop.phone}}. Don’t forget to review our service specials before you arrive.

Your 2019 Chevrolet Blazer is designed to run on {{vehicle.oem_oil_spec}} to meet GM durability and emissions targets. The typical service fill is {{vehicle.oil_capacity_quarts}} quarts when replacing the filter, but our technicians always confirm the final level on a level surface at operating temperature. The OEM maintenance interval is {{vehicle.oem_oil_interval_miles}} miles (or per the Oil Life Monitoring System), with more frequent changes advisable for severe conditions. We install an OEM-quality oil filter engineered for proper bypass pressure and media efficiency and review your vehicle for any applicable oil-related Technical Service Bulletins. Bring your 2019 Chevrolet Blazer to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

We proudly serve the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy, from our location at 5500 S State St, Murray, UT 84107. Our environment—{{rooftop.climate_context}}—can impact oil viscosity, cold-start pumpability, and dust ingestion, so staying current on oil service is essential. With {{rooftop.years_in_operation}} years serving local drivers and {{rooftop.certified_tech_count}} certified technicians, we follow GM procedures and use OEM-spec fluids to help protect your engine and warranty. Book online to secure a convenient time, and review our service specials before you arrive. To visit, plug our address into your maps app or schedule an appointment and we’ll see you soon.