2018 Chevrolet Traverse Air Filter in Murray, UT

The engine filter protects the 3.6L V6 intake, while the cabin filter cleans HVAC air for passengers.

The engine air filter prevents dust and debris from entering the combustion air stream, helping your 2018 Chevrolet Traverse maintain power and efficiency. The cabin air filter screens pollen and particulates before they reach the vents, improving in-vehicle air quality. Both are serviceable components and benefit Utah commuters during high-pollen and dusty road periods. We install OEM-spec filters for proper fit and sealing.

• Engine: 3.6L V6 (engine code 6VNAG3.6) intake protection
• Cabin: HVAC airflow and odor reduction for occupants
• OEM-spec filters installed for correct fitment

It sits under the hood in a sealed black airbox connected to the intake tube.

On the 2018 Chevrolet Traverse, the engine filter is housed in a rectangular airbox in the engine bay with clips or screws securing the cover. The cabin air filter is separate and typically accessed behind the glove box. If you prefer assistance, our Murray, UT service team can locate, inspect, and replace both filters during a single visit.

• Engine filter: sealed airbox in the engine bay
• Cabin filter: typically behind the glove box
• Book a check via our schedule service tool

Watch for reduced power from the 305-hp V6, worse than EPA 17/25 mpg economy, weak HVAC airflow, or musty odors.

Restricted engine airflow can blunt throttle response and lower fuel economy compared to the 2018 Chevrolet Traverse EPA ratings. A dirty cabin filter often shows up as diminished vent output, lingering odors, and increased window fogging. In Wasatch Front driving, dust and seasonal particulates can accelerate filter loading—consider more frequent inspections if you tow or commute in traffic.

• Performance: sluggish acceleration or rough idle
• Economy: noticeable drop from 17 city / 25 highway mpg
• Cabin: weak airflow or persistent musty smell

Yes—engine filters are typically DIY-friendly, while cabin filters often require glove box access and trim removal.

The engine filter sits in an accessible airbox, making it a common owner task on the 2018 Chevrolet Traverse. Cabin filters can involve releasing the glove box and working in tight spaces. Dealer service adds an intake housing check, a visual MAF inspection, and installation of OEM-spec filters. If you prefer professional service, book online and review current offers.

• DIY: engine airbox access with basic tools
• Dealer: intake/MAF inspection plus OEM filter spec
• Browse service specials before you schedule

Yes—our Murray, UT service center installs genuine OEM Chevrolet filters.

Using factory-spec filters helps ensure proper sealing, filtration efficiency, and airflow on your 2018 Chevrolet Traverse. Our technicians are OEM-trained and follow Chevrolet procedures for inspection and replacement. This supports performance, efficiency, and HVAC air quality throughout the Wasatch Front.

• Genuine OEM Chevrolet filters for fit and performance
• Factory-trained technicians and documented procedures
• Book an appointment: schedule service

Chevrolet lists the engine air filter interval for the 2018 Chevrolet Traverse in the owner’s manual maintenance schedule.

Driving across Murray and the greater Salt Lake City area can expose your intake to dust and road debris. If you frequently tow (up to 5,000 lbs when properly equipped) or drive in construction zones, plan more frequent inspections. We’ll check restriction, inspect the airbox seal, and advise based on actual condition.

• Follow the Chevrolet maintenance schedule guidance
• Increase inspections in dusty or high-mileage use
• Quick booking via schedule service

The 2018 Chevrolet Traverse cabin filter interval is specified in your Chevrolet maintenance schedule.

Cabin filters load faster during pollen seasons and with dusty Wasatch Front driving. If you notice reduced vent airflow or odors, have us inspect it sooner. We use OEM-spec media to balance airflow and filtration, helping the HVAC system maintain clear defrost and consistent cooling or heat.

• Refer to your owner’s manual for the interval
• Inspect sooner with strong pollen or dust exposure
• Check offers: service specials

Air filter service is completed during a standard visit at 5500 S State St, Murray, UT 84107.

Our team coordinates engine and cabin filter checks with routine maintenance to minimize downtime for Salt Lake City–area drivers. While you wait, we’ll inspect the intake housing and perform a visual MAF sensor check. Use our online tool to pick a time that fits your schedule, and review available offers beforehand.

• Same-stop convenience with routine maintenance
• Includes housing and MAF visual checks
• Reserve a time: schedule appointment

Get up-front pricing for engine and cabin filters at our Murray, UT location—5500 S State St, Murray, UT 84107.

We provide transparent quotes for the 2018 Chevrolet Traverse and list current offers online. Pricing reflects OEM-spec filters, intake housing inspection, a visual MAF check, and proper disposal. For today’s estimate and any available discounts, start with our scheduler and specials pages.

• See offers: service specials
• Book and get a quote: schedule service
• Includes OEM-spec parts and inspection steps

Our air filter service for your 2018 Chevrolet Traverse is designed to protect performance, efficiency, and cabin comfort. A technician confirms the condition of the engine air filter, removes debris, and installs an OEM-spec replacement when needed. We then inspect the intake housing and seals to ensure there are no leaks or gaps that could bypass filtration. A visual Mass Air Flow (MAF) sensor check is performed to identify contamination or wiring concerns that could affect drivability. The cabin air filter is accessed, inspected, and replaced with OEM-spec media to restore HVAC airflow and reduce odors. After reassembly, we verify fitment and operation. Ready to plan your visit? Review current service specials and schedule service online.

The 2018 Chevrolet Traverse uses an engine air filter sized for the 3.6L V6 (engine code 6VNAG3.6) intake system and a separate cabin air filter for the HVAC. Chevrolet’s maintenance schedule in your owner’s manual provides the replacement intervals; Utah driving conditions can warrant more frequent inspections. We install genuine OEM Chevrolet filters or OEM-equivalent parts that meet factory specifications for media, pleat density, and sealing surfaces. A properly sealed engine filter helps the V6 deliver its rated 305 hp and 260 lb-ft without ingesting debris, while the cabin filter maintains consistent defrost and ventilation. If you notice reduced performance or weak HVAC airflow, it’s time for an inspection. Bring your 2018 Chevrolet Traverse to Larry H. Miller Chevrolet Murray in Murray for OEM-spec filter service — schedule service.

We serve the greater Salt Lake City area from our Murray location, welcoming drivers from South Jordan, West Jordan, Midvale, and Sandy. Local commuting and mountain travel can expose your 2018 Chevrolet Traverse to dust, road debris, and seasonal particulates that load filters faster. Our technicians inspect the engine airbox, filter media, and cabin element, then advise service based on actual condition. You can plan ahead online, align the visit with other maintenance, and review current offers before you come in. Find us at 5500 S State St, Murray, UT 84107, explore service specials, and schedule service for a time that works for you.