2016 Chevrolet Silverado 2500HD Oil Change

An oil change for a 2016 Chevrolet Silverado-2500hd at LHM Chevy Murray typically takes 45–60 minutes.

Our process includes check-in, the oil and filter service, a multi-point inspection, and proper fluid top-offs, which most drivers complete within an hour. Plan your visit around errands in Murray or relax in our waiting area, then head back on the road with documented service records. To minimize wait time, schedule ahead online.

• Most appointments completed in 45–60 minutes
• Includes OEM-spec oil, ACDelco filter, and inspection
• Schedule service to lock in your time

Under normal use, change oil about every 7,500 miles (or when the GM Oil Life Monitor reaches 0%).

Utah’s mix of cold starts, mountain grades, dust, and towing can qualify as severe duty; in those conditions, many owners service oil closer to every 3,000–5,000 miles. The 2016 model’s Driver Information Center displays remaining oil life—follow that guidance and keep records for warranty protection. If you tow or idle frequently around the Wasatch Front, shorten intervals.

• Normal driving: up to ~7,500 miles between services
• Severe duty (towing, dust, short trips): ~3,000–5,000 miles
• Book your next visit: schedule service

Gas 6.0L: SAE 5W-30 dexos1-approved full synthetic; 6.6L Duramax diesel: 15W-40 (or 5W-40 in cold weather) meeting API CK-4/CJ-4.

Using the correct viscosity and specification ensures proper cold-start protection and high-load film strength for your heavy-duty Chevrolet. If you regularly face sub-freezing mornings in Murray or head over snowy passes, a 5W-40 synthetic is recommended for the Duramax. We install OEM-spec oil and ACDelco filters to match your engine.

• Dexos1 full synthetic for the 6.0L gas V8
• API CK-4/CJ-4 15W-40 or 5W-40 for Duramax
• OEM-spec oil and filter included at LHM Chevy Murray

The 6.0L gas V8 holds about 6.0 quarts with filter; the 6.6L Duramax diesel holds about 10.0 quarts.

Capacity varies by engine, so it’s important to match the fill to your 2016 Chevrolet Silverado-2500hd’s configuration. Our technicians verify your engine and service history before filling and setting levels. After refilling, we reset the Oil Life Monitor and check for any leaks or alerts.

• 6.0L gas: ~6.0 quarts with filter
• 6.6L Duramax: ~10.0 quarts with filter
• We recycle used oil per EPA guidelines in Murray, UT

Yes—dealer service includes OEM-spec oil and ACDelco filters plus a documented multi-point inspection.

Quick-lube shops can be convenient, but dealership service ensures the correct dexos1 or diesel-rated oil and filter are used and recorded for future warranty needs. We also check brakes, tires, battery, and fluids—items often missed elsewhere. You’ll leave with digital records linked to your VIN and recommendations tailored to Wasatch Front driving.

• Correct spec oil/filter for gas or Duramax engines
• Multi-point inspection and fluid top-offs
• Service records preserved for warranty and resale

Skipping manufacturer-recommended oil services can jeopardize coverage if a related failure occurs and maintenance can’t be verified.

Follow your owner’s manual and the Oil Life Monitor, and keep receipts or dealer records to show timely oil service. Warranty diagnostics and repairs typically require a certified facility, and documented maintenance helps protect you. We’ll log each visit to your 2016 Chevrolet Silverado-2500hd’s service history for easy proof.

• Follow OLM and manual; keep records
• Certified service supports warranty validation
• View offers before you book: service specials

Full synthetic provides the best oxidation resistance and cold-flow compared to synthetic blend or conventional.

For the 6.0L gas V8, GM’s dexos1 standard is typically met by full synthetic oils, which help during cold Murray mornings and under towing loads. Duramax owners often prefer 5W-40 synthetic in winter for faster lubrication. Conventional or blends can work in some conditions, but they generally require shorter intervals.

• Full synthetic: strongest high-temp and cold-start protection
• Synthetic blend: middle ground on cost and performance
• Conventional: acceptable where allowed, shorter intervals

At Larry H. Miller Chevrolet Murray, typical oil-change pricing ranges from about $79–$169 depending on engine (gas vs. Duramax) and oil type.

You’ll see up-front pricing, and our service specials may reduce your total. Gas 6.0L services generally cost less than the higher-capacity Duramax diesel service. Book online to lock in your appointment and request a written estimate.

• Transparent pricing provided at check-in
• Specials available: view offers
• Reserve a time: schedule service

For your 2016 Chevrolet Silverado-2500hd, our oil-change process is structured to be thorough and consistent. We begin by confirming the engine (6.0L gas or 6.6L Duramax) and verifying the correct specification. Next, we drain the old oil, replace the drain gasket as needed, and install an OEM-spec ACDelco oil filter. We then fill with the proper viscosity and specification for your engine and climate, reset the Oil Life Monitor, and check for leaks. Every visit includes a multi-point inspection, fluid top-offs, and a tire pressure check so you leave with baseline confidence for towing, hauling, and daily driving around Murray and the greater Salt Lake City area.

We’ll document the service to maintain clear records that support warranty validation and long-term resale value. When you’re ready, use our online tool to schedule service and review current service specials before you arrive.

The correct oil depends on your engine and operating conditions. The 6.0L gas V8 typically uses SAE 5W-30 dexos1-approved full synthetic to ensure proper cold-start pumpability and high-temperature stability. The 6.6L Duramax diesel requires heavy‑duty diesel oil meeting API CK-4/CJ-4: 15W-40 for most temperatures, and 5W-40 synthetic for improved winter flow in Utah. Approximate fill capacities are about 6.0 quarts for the 6.0L and about 10.0 quarts for the Duramax, including filter changes. Follow the GM Oil Life Monitor, with many owners servicing around 7,500 miles in normal use and sooner under severe duty such as towing or dusty trails. Bring your 2016 Chevrolet Silverado-2500hd to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

We proudly serve drivers across the greater Salt Lake City area—including South Jordan, West Jordan, Midvale, and Sandy—with oil services tailored to local conditions. Utah’s winters demand reliable cold-start lubrication, while summer heat, dust, steep grades, and towing put extra stress on engine oil. Our team installs the correct dexos1 full synthetic for the gas 6.0L or diesel-rated oil for the Duramax, then completes a documented inspection to catch small issues early. Whether you commute I‑15 or head for canyon passes, we’ll match your oil to real-world duty cycles and reset your Oil Life Monitor so you know exactly when you’re due next.

Find us at 5500 S State St, Murray, UT 84107. For a convenient visit, schedule an appointment and check current service specials before you arrive.