2014 Chevrolet Spark Oil Change in Murray, UT

Expect ${{vehicle.real_oil_change_price_range_usd.min}}–${{vehicle.real_oil_change_price_range_usd.max}} for a 2014 Chevrolet Spark oil change at Larry H. Miller Chevrolet Murray.

This price range includes OEM-spec oil and an OEM-quality filter installed by GM-trained technicians. You’ll also get a multi-point inspection, fluid top-offs, and used-oil disposal, with up-front pricing and no surprises. Check our current service specials and lock in a time with our online schedule service tool.

• Includes OEM-spec oil and GM-quality filter
• Multi-point inspection and fluid top-offs are part of the visit
• View deals anytime on our service specials page

Plan for about {{service.duration_minutes}} minutes for a 2014 Chevrolet Spark oil change at our GM-certified service center.

Our workflow is designed for quick in-and-out service without cutting corners. We use OEM procedures and provide a documented inspection, so you leave with clarity on vehicle health. Book ahead to minimize wait time and take advantage of any open service bays.

• Typical appointment: {{service.duration_minutes}} minutes, start to finish
• Documented multi-point inspection included
• Reserve your spot with our online scheduler

Under normal driving, change oil every {{vehicle.oem_oil_interval_miles}} miles; use a shorter interval for severe Utah conditions.

Severe service includes frequent short trips, extended idling, higher loads on mountain grades, and dusty roads common along the Wasatch Front. Following the factory schedule helps protect the 1.2L inline-4 and preserves warranty compliance. When in doubt, follow the oil life monitor and consult our team.

• Follow the factory {{vehicle.oem_oil_interval_miles}}-mile guidance
• Shorten intervals for heavy stop-and-go or mountain driving
• Book on our schedule service page

Use {{vehicle.oem_oil_spec}} in the 2014 Chevrolet Spark for proper protection and performance.

Using the specified oil ensures the correct viscosity and additive package for the 1.2L inline-4 (engine code 4INAG1.2). We install GM-quality filters and reset your oil life monitor after service. If you’re unsure what’s currently in your vehicle, our advisors can verify and align to OEM standards.

• Meets OEM specification: {{vehicle.oem_oil_spec}}
• Correct viscosity supports cold starts and high-RPM protection
• Confirm details in your owner’s manual or ask an advisor

The 2014 Chevrolet Spark needs {{vehicle.oil_capacity_quarts}} quarts of oil with a new filter.

After refilling, technicians verify the level on the dipstick and inspect for leaks. Accurate fill helps maintain oil pressure and protects timing components and bearings. If you’re topping off between services, use the OEM-specified oil and recheck the level on a level surface.

• Capacity (with filter): {{vehicle.oil_capacity_quarts}} quarts
• Use only oil that meets {{vehicle.oem_oil_spec}}
• Schedule a professional top-off or change online

Dealer oil changes include OEM-spec oil, a GM-quality filter, and a multi-point inspection—value many quick-lube shops may not bundle.

At Larry H. Miller Chevrolet Murray, your service is documented for warranty purposes and completed by factory-trained technicians. We also check for open service campaigns that may apply. Compare offerings and choose what fits your needs—our goal is transparency and quality.

• OEM-spec oil/filter and disposal included
• Documented inspection supports warranty records
• See current service specials before you book

Skipping required oil services can impact warranty coverage; keep receipts and follow the factory schedule.

Maintain your service intervals and retain records to demonstrate compliance if warranty work is needed. Warranty terms: {{rooftop.warranty_terms.oil_change}}. For your protection, warranty work generally requires a certified facility to verify OEM procedures and parts.

• Follow factory intervals and oil spec
• Keep dated invoices and mileage records
• Book certified service via our schedule appointment tool

Conventional is mineral-based, synthetic blend mixes base stocks, and full synthetic uses engineered base oils for higher stability and cleaner performance.

Your 2014 Chevrolet Spark should use {{vehicle.oem_oil_spec}} to match GM’s protection and cleanliness targets. Full synthetic typically resists oxidation and handles temperature swings better, which is helpful for Utah’s varied driving. Always match the OEM spec to protect engine components and maintain warranty compliance.

• Follow OEM requirement: {{vehicle.oem_oil_spec}}
• Synthetics aid cold starts and high-heat protection
• Confirm the label and schedule service if unsure

Larry H. Miller Chevrolet Murray serves the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy. Local conditions—mountain grades, temperature swings, and stop-and-go traffic—can qualify as severe duty, making oil quality and inspection discipline essential. Our GM-trained team uses OEM procedures and documents each visit, so you have clear maintenance records when you need them. Find us at 5500 S State St, Murray, UT 84107. Explore current offers on our service specials page and lock in a time with our schedule service tool. If questions arise about the right interval or oil spec for your 2014 Chevrolet Spark, our advisors will provide direct, fact-based guidance.

Every oil service is completed to GM standards and documented for your records. After verifying concern and mileage, we safely lift the vehicle, remove the drain plug, and capture used oil for proper disposal. A GM-quality filter is installed, the drain seal is replaced as needed, and we refill with oil that meets {{vehicle.oem_oil_spec}}. We then reset the oil life monitor, check for leaks, and perform a multi-point inspection covering tires, brakes, fluids, belts, and visible leaks. Fluids are topped off, and tire pressures are adjusted to spec. Warranty terms for oil service: {{rooftop.warranty_terms.oil_change}}. To keep your 2014 Chevrolet Spark on schedule, review our service specials and schedule service at your convenience.

Use oil that meets {{vehicle.oem_oil_spec}} to protect the 1.2L inline-4 (engine code 4INAG1.2) in your 2014 Chevrolet Spark. The system capacity is {{vehicle.oil_capacity_quarts}} quarts with a new filter; always verify the dipstick after filling. Pair the correct oil with an OEM-quality filter to maintain filtration efficiency and flow. Follow the factory interval of {{vehicle.oem_oil_interval_miles}} miles under normal use, shortening the interval for severe duty such as frequent short trips, high-load climbs, or dusty roads. Common oil-related bulletins/concerns: {{vehicle.common_issues}}. Bring your 2014 Chevrolet Spark to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.