2014 Chevrolet Impala Oil Change in Murray, UT

Follow the maintenance interval in your 2014 Chevrolet Impala owner’s manual to protect the engine and maintain warranty compliance.

Utah’s mix of winter cold starts, summer heat, and stop‑and‑go traffic can qualify as severe driving, so many Murray drivers service sooner than typical intervals. Our advisors review your mileage and conditions to recommend timing that fits how you drive. We document each visit for accurate service records and easy reference later. Book a convenient appointment online anytime.

• Service for 2014 Chevrolet Impala sedans driven across the Wasatch Front
• Severe‑duty examples: frequent short trips, dust, temperature swings
• Schedule service or check service specials

Use the viscosity and oil specification listed in your 2014 Chevrolet Impala owner’s manual with an OEM‑quality filter to meet factory requirements.

Your Impala’s 2.5‑liter inline‑4 is engineered for a specific viscosity and spec to ensure proper cold‑start pumpability and high‑temp protection. Our Chevrolet service team installs OEM‑spec oil and a quality filter, then confirms the correct level. If you’re unsure about the spec for your VIN, we can reference it at check‑in and note it on your invoice for easy tracking.

• Engine: 2.5L inline‑4 (engine code 4INAG2.5)
• OEM‑spec oil/filter installed by trained technicians
• Schedule service for the correct fill and parts

Your 2014 Chevrolet Impala 2.5L inline‑4 (engine code 4INAG2.5) should be filled to the factory oil capacity listed in the owner’s manual.

We fill to the manufacturer specification and verify on the dipstick at operating temperature. This protects bearings and variable‑valve components while preventing over‑ or under‑filling. If you bring your own oil, we’ll confirm the correct amount and return any extra bottles so you always know what went in.

• Factory‑specified capacity confirmed at each visit
• Proper level check at operating temperature
• Easy online booking: schedule service

Dealer oil changes use OEM‑spec oil and filters and include a multi‑point inspection; quick‑lube shops may be cheaper but vary in parts and procedures.

At Larry H. Miller Chevrolet Murray, we install oil and filters that meet Chevrolet specifications and document the service on your repair order. Our techs also perform a multi‑point inspection and top off key fluids, which many quick‑lube locations may not include. Choose the option that fits your priorities for parts quality, documentation, and convenience.

• OEM‑spec oil/filter, multi‑point inspection, and fluid top‑offs
• Service documentation for maintenance records
• View service specials before you book

Missing required oil changes can jeopardize warranty coverage if you can’t show you followed the factory schedule with dated records.

Keep receipts and repair orders that list mileage, date, oil spec, and filter used. Warranty work typically requires a certified facility and proof you maintained the car per the schedule. We store service records electronically so you can access them later if coverage questions arise.

• Save invoices showing oil spec and mileage
• Certified service supports warranty claims
• Book now: schedule service

Full synthetic delivers the strongest cold‑start and high‑temp protection, synthetic blend is mid‑range, and conventional offers basic protection.

Utah’s weather swings and mountain grades stress oil, so many drivers prefer full synthetic for stability and cleanliness. We’ll match the oil to the specification in your owner’s manual and your driving conditions. If you’re unsure, our advisors can outline pros and cons for your mileage and commute.

• Full synthetic resists oxidation and heat better
• Blend balances cost and performance
• Conventional is acceptable only when it meets the factory spec

Plan for a same‑day visit; actual bay time varies with the day’s schedule and whether inspections find additional items.

We aim to turn routine oil services efficiently while still performing quality checks on brakes, tires, and fluids. To minimize wait time, set an appointment and arrive a few minutes early. If we spot anything urgent during the inspection, we’ll review options before doing any extra work.

• Easy online appointments: schedule service
• Multi‑point inspection included with each visit
• Waiting lounge near 5500 S State St, Murray, UT 84107

Use the interval in your owner’s manual and adjust sooner for severe conditions like frequent short trips, dust, or extreme temperatures.

Driving across the Wasatch Front can mean cold starts in winter and hot interstate miles in summer—both shorten oil life. Our team in Murray reviews your commute and mileage to tailor timing and note it on your repair order. This helps preserve performance and supports warranty compliance.

• Local guidance for Murray, Salt Lake City, and nearby areas
• Service records maintained for your 2014 Chevrolet Impala
• Service specials can help reduce cost

Each visit includes OEM‑spec oil and filter, a multi‑point inspection, and fluid top‑offs documented on your repair order.

We drain and replace engine oil to factory specs, install an OEM‑quality filter, and check items like brakes, tires, battery, and wipers. Our advisors review findings so you can prioritize any future work. See our current offers before you book.

• OEM‑spec oil/filter and proper torque on the drain plug
• Multi‑point inspection plus tire pressure check
• Book now: schedule service | View service specials

Your 2014 Chevrolet Impala service starts with verifying mileage and concerns, then safely lifting the sedan for access to the 2.5‑liter inline‑4. We drain the engine oil, replace the crush washer as applicable, install an OEM‑quality filter, and fill with oil that meets the specification in your owner’s manual. A multi‑point inspection checks brakes, tires, battery, lights, and wipers, and we top off key fluids and set tire pressures. After confirming the level at operating temperature and checking for leaks, we document the oil spec and filter on your repair order for clear records. Want to save on your visit? Review our current service specials, then schedule service at a time that fits your day.

Larry H. Miller Chevrolet Murray serves the greater Salt Lake City area—including South Jordan, West Jordan, Midvale, and Sandy—with factory‑authorized oil service tailored to Utah’s climate. Cold mornings demand strong pumpability, while summer heat and canyon climbs require stable high‑temperature protection. Our certified team uses OEM‑spec oil and filter, sets tire pressures for local temperature swings, and records everything on your invoice. You can wait in our lounge or drop the car and return when it’s ready. Find us at 5500 S State St, Murray, UT 84107. Questions about timing or oil type for your 2014 Chevrolet Impala? Call our advisors or schedule an appointment online for a quick check‑in and clear next steps.

The 2014 Chevrolet Impala with the 2.5‑liter inline‑4 engine is designed to run on oil that matches the viscosity and specification outlined in the owner’s manual. We install OEM‑spec oil and an OEM‑quality filter, then verify the correct level at temperature to protect timing and valvetrain components. If you drive in severe conditions—frequent short trips, dust, or wide temperature swings—our advisors can help you adjust service timing accordingly. Concerned about technical bulletins or past service? We’ll review records at check‑in and note any findings on your repair order. Bring your 2014 Chevrolet Impala to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.