2014 Chevrolet Impala Air Filter

It sits in a rectangular air box on the driver side of the engine bay, ahead of the intake tube; the cabin air filter is behind the glove box.

This layout makes routine checks on the 2014 Chevrolet Impala straightforward. Open the air box clips to access the panel-style engine filter for the 2.5L inline-4, and drop the glove box to reach the cabin filter. If you prefer a professional inspection, you can schedule service in Murray for quick, OEM-spec replacement.

• Engine air box: driver-side, near the intake snorkel
• Cabin filter: behind glove box, accessed after loosening stops
• No programming required after replacement when installed correctly

The engine air filter protects the 2.5L inline-4s intake from dust/debris, while the cabin air filter cleans the HVAC air you breathe inside the car.

On the 2014 Chevrolet Impala, the engine filter supports combustion quality and helps maintain power and fuel economy, while the cabin filter targets comfort by trapping pollen and road dust. Replacing both at proper intervals keeps performance steady and your interior air fresh. If needed, our team can inspect both filters during a single visit.

• Engine filter: panel element in the under-hood air box
• Cabin filter: pleated media behind glove box
• Different roles: performance protection vs. occupant air quality

Common signs include reduced power, lower fuel economy, and rough idle for the engine filter; weak HVAC airflow and musty odors for the cabin filter.

If your 2014 Chevrolet Impala struggles on highway climbs or the fan sounds strong but little air comes through the vents, filters may be restricted. Visual inspection of the media for dark, packed debris confirms the condition. For clarity and a quick check, book a schedule appointment at LHM Chevy Murray.

• Engine: sluggish acceleration, higher fuel use
• Cabin: reduced airflow, dusty or stale smell from vents
• Visible dirt on filter pleats indicates replacement time

The engine filter is typically DIY-friendly with basic tools, while the cabin filter is also accessible but can require moving the glove box stops; dealer service adds checks and OEM parts.

Many owners swap the engine filter on the 2014 Chevrolet Impala at home by unclipping the air box. Our technicians add value with intake housing inspection, a visual MAF check, and OEM-spec media to ensure fit and seal. If you prefer a pro install, use our online scheduler.

• DIY: basic screwdriver for air box clips, gentle glove box release
• Dealer: OEM filters, proper sealing, intake/MAF visual
• Disposal of used filters handled responsibly in-shop

Yeswe install genuine OEM Chevrolet air filters that meet factory specifications for fit and filtration.

Using the correct media and seal profile helps the 2014 Chevrolet Impala maintain intake performance and interior air quality. Our Murray service center follows Chevrolet procedures and uses parts designed for your vehicle. Check current service specials before you book.

• Engine and cabin filters matched to your VIN
• Factory-trained technicians follow OEM procedures
• Consistent performance and fit versus off-spec parts

Appointment options and estimated visit times are shown in our online scheduler for transparent planning.

To see real-time availability for your 2014 Chevrolet Impala, select a slot in our Murray, UT calendar and well prepare parts and bay time accordingly. This helps minimize wait time and ensures the correct OEM filters are on hand. Start here: schedule service.

• Choose a time that fits your day via the scheduler
• We stage OEM parts in advance for efficiency
• Express-friendly service when the vehicle is pre-booked

Follow the interval in your Chevrolet maintenance schedule for your VIN to protect the 2.5L inline-4.

Driving patterns around the Wasatch Front can vary, so inspect sooner if you frequent construction zones or gravel roads. Our technicians can assess the filter condition on your 2014 Chevrolet Impala and advise based on local use. If youre unsure, book an inspection via our schedule appointment.

• Check the owners manual or in-vehicle maintenance menu
• Inspect earlier if you notice power loss or high fuel use
• Combine with oil service for convenience

Use the cabin filter interval in the Chevrolet maintenance schedule, and replace sooner if airflow drops or odors appear.

Cabin filters on the 2014 Chevrolet Impala load faster if you commute in high pollen or dusty conditions. If the fan sounds strong but airflow is weak, its time to inspect. For a quick swap using OEM media, reserve time in our online scheduler or check service specials.

• Monitor HVAC airflow and odors as practical cues
• Replace before long trips for comfort
• Combine with cabin deodorizer upon request

Our service team supports drivers across the greater Salt Lake City areaincluding South Jordan, West Jordan, Midvale, and Sandywith OEM-spec air filter care for the 2014 Chevrolet Impala. Utah highway commutes and mountain-pass drives make clean filtration essential for engine performance and cabin comfort. We inspect both the under-hood intake path and the behind-glove-box cabin filter housing, then install genuine Chevrolet media for proper fit and seal. Visit us at 5500 S State St, Murray, UT 84107 for efficient service aligned with factory procedures. Ready to plan your visit? Use our schedule service tool or review current service specials before you arrive.

The 2014 Chevrolet Impala pairs a 2.5L inline-4 (195 hp at 6,300 rpm; 187 lb-ft at 4,400 rpm; engine code 4INAG2.5) with a panel-style engine air filter housed in a rectangular air box on the driver side. The cabin air filter sits behind the glove box and uses pleated media to capture dust and pollen before it enters the HVAC system. Follow the Chevrolet maintenance schedule for both engine and cabin filter intervals; inspect sooner if performance or airflow declines. Bring your 2014 Chevrolet Impala to Larry H. Miller Chevrolet Murray in Murray for OEM-spec filter serviceschedule service.

During an air filter visit for your 2014 Chevrolet Impala, our technicians perform a focused sequence: verify intake ducting integrity, open the engine air box, inspect the panel element, and replace it with an OEM-spec filter if needed. Next, we lower the glove box to access the cabin filter, check the media, and install a new OEM-spec element when appropriate. We finish with an intake housing seal check and a visual MAF sensor inspection to confirm proper airflow readings. To bundle this service with other maintenance or to pick a time that fits your day, use our schedule service tool and review service specials.