2014 Chevrolet Camaro Oil Change in Murray, UT

An oil change for a 2014 Chevrolet Camaro at Larry H. Miller Chevrolet Murray typically costs ${{vehicle.real_oil_change_price_range_usd}}.

Our pricing reflects OEM-spec oil and an ACDelco filter, plus a technician-performed inspection tailored to your Chevrolet. You’ll see the total before work begins, and you can view offers on our service specials page. Schedule online any time.

• Up-front pricing with line-item transparency
• Includes OEM-spec oil and ACDelco filter
• Multi-point inspection and proper disposal included

Plan about {{service.duration_minutes}} minutes for a dealership oil change, including inspection and paperwork.

Time can vary based on shop volume and added services, but our Murray team works efficiently while maintaining Chevrolet standards. Book a time slot online to minimize wait time and get back on the road quickly.

• Typical visit: oil service + multi-point check
• Online check-in to speed your drop-off
• Convenient schedule service tool

Under normal driving, change the oil about every {{vehicle.oem_oil_interval_miles}} miles (or as your Oil Life Monitor indicates).

Utah’s mix of cold starts, dusty conditions, mountain grades, and stop-and-go traffic can qualify as severe duty, which may warrant shorter intervals. Our advisors in Murray can review your routes and recommend a schedule that protects your engine and supports warranty compliance.

• Follow the Chevrolet maintenance schedule and OLM
• Shorter intervals for heavy towing, dust, or frequent short trips
• Keep service records for warranty support

Use {{vehicle.oem_oil_spec}} that meets GM dexos standards for the 2014 Chevrolet Camaro.

Using the specified oil ensures proper viscosity across Utah’s temperatures and helps maintain performance and efficiency. We stock dexos-approved oils and apply the correct grade for your engine, verified by your VIN and service history.

• Meets GM dexos requirements
• Correct viscosity for cold starts and high-load driving
• Paired with an OEM-quality ACDelco filter

The 2014 Chevrolet Camaro takes about {{vehicle.oil_capacity_quarts}} quarts of oil with a filter change.

Capacity can vary slightly by engine and configuration, so our technicians confirm the exact fill by VIN and verify level after the engine reaches operating temperature. Proper fill prevents aeration and ensures stable pressure under spirited driving.

• Capacity includes filter replacement
• Level verified after warm-up and settle time
• Drain-plug gasket inspected and replaced if needed

Dealer service uses OEM-spec dexos oil and an ACDelco filter, plus a documented multi-point inspection many quick-lube shops don’t include.

At Larry H. Miller Chevrolet Murray, your Camaro’s service follows Chevrolet procedures and is recorded to help support warranty coverage. Quick-lube locations can be convenient, but verify dexos certification, the filter brand, and that your service is documented.

• OEM-spec oil/filter and torque specs applied
• Service records maintained for warranty support
• Inspection can catch leaks or wear early

Missing or exceeding scheduled oil changes can jeopardize warranty coverage if maintenance isn’t performed and documented per Chevrolet’s schedule.

Keep receipts and digital records showing the correct oil, filter, and mileage dates. Warranty diagnostics and repairs generally require certified facilities; servicing with OEM-spec parts helps protect your coverage.

• Follow the owner’s manual/OLM guidance
• Retain invoices with oil spec and mileage
• Certified service supports warranty validation

GM specifies {{vehicle.oem_oil_spec}} for this engine; full synthetic offers better high-temp stability and cold-flow than conventional.

Full synthetic resists oxidation during hot Wasatch climbs and pumps quickly on winter mornings in Murray. Blends improve on conventional but may not meet the same performance standards as the specified dexos full synthetic for your Chevrolet.

• Full synthetic = stronger protection and cleanliness
• Blend = mid-tier performance at lower cost
• Conventional = not typically dexos-approved

Every 2014 Chevrolet Camaro oil change in our Murray service center follows Chevrolet procedures from start to finish. We verify VIN and service history, then drain the engine oil, replace the crush washer as needed, and install an ACDelco oil filter. We fill with OEM-spec {{vehicle.oem_oil_spec}} to the correct capacity, reset the Oil Life Monitor, and road-test to confirm pressure and leaks. A multi-point inspection checks belts, hoses, brakes, tires, and visible leaks, with fluid top-offs and tire pressure set to spec. Review current service specials, then schedule service online for a time that works.

Your 2014 Chevrolet Camaro runs best on {{vehicle.oem_oil_spec}} formulated to GM dexos standards. The engine typically requires about {{vehicle.oil_capacity_quarts}} quarts with filter replacement; our technicians measure, warm-cycle, and recheck to confirm the exact level. Under normal driving, plan oil service around {{vehicle.oem_oil_interval_miles}} miles or when prompted by the Oil Life Monitor; harsh conditions may shorten that window. We install an OEM-quality ACDelco oil filter to maintain proper filtration and anti-drainback performance. If your vehicle has any oil-related service bulletins or known concerns listed in your maintenance history, we’ll address them during inspection. Bring your 2014 Chevrolet Camaro to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

We serve the greater Salt Lake City area—South Jordan, West Jordan, Midvale, and Sandy—with oil changes tuned to local conditions. Cold winters demand strong cold-start pumpability; dusty summer construction and canyon drives call for robust filtration; mountain grades and towing increase oil temperatures. Our Murray facility at 5500 S State St, Murray, UT 84107 is easy to reach from I-15, with online check-in and status updates. View service specials to save on your next visit, then schedule appointment for your 2014 Chevrolet Camaro.