2013 Chevrolet Suburban Oil Change in Murray, UT

An oil change for a 2013 Chevrolet Suburban typically ranges from $79 to $129 at Larry H. Miller Chevrolet Murray, with up-front pricing.

This range reflects OEM-spec oil and an ACDelco filter, plus a multi-point inspection and fluid top-offs. Pricing may vary with oil type and current service specials. You can view live pricing and appointment times in our online scheduler before you book.

• Price includes OEM-spec oil and ACDelco filter
• Multi-point inspection and fluid top-offs are performed
• See real-time pricing when you schedule service

Plan for about 60 minutes at the dealership to complete a 2013 Chevrolet Suburban oil change with inspection.

This time covers check-in, drain and refill, filter replacement, disposal, and a multi-point inspection tailored to Suburban towing and highway use around Salt Lake County. For the fastest visit, pick an open bay time in our online scheduler.

• Typical in-bay time: ~30 minutes; total visit: ~60 minutes
• Includes inspection and test reset for the oil life monitor
• Book precise timeslots online to reduce waiting

Change your 2013 Chevrolet Suburban oil about every 7,500 miles or 12 months under normal driving, or 3,000–5,000 miles for severe Utah conditions.

Frequent towing, mountain grades, dust, and short cold-weather trips around the Wasatch Front count as severe duty and shorten intervals. Always follow the Oil Life Monitoring system and confirm the interval in your owner’s manual.

• Normal service: ~7,500 miles/12 months (follow OLM)
• Severe duty: ~3,000–5,000 miles depending on use
• Schedule service when the OLM reminder appears

The 2013 Chevrolet Suburban uses SAE 5W-30 engine oil that meets GM dexos1 specifications; full synthetic is recommended.

Dexos1-certified 5W-30 helps cold-start performance in Utah winters and resists breakdown under towing heat. We stock GM-approved oils and the correct ACDelco filter to protect your V8 and maintain service records.

• Viscosity: SAE 5W-30 (GM dexos1)
• Full synthetic recommended for protection and stability
• OEM ACDelco filter installed and documented

The 6.0L V8 in a 2013 Chevrolet Suburban holds about 6.0 quarts of oil with a new filter.

Capacity can vary slightly by engine option, so we confirm fitment by VIN and verify the dipstick level after refill. Using the correct fill helps prevent aeration and preserves oil pressure when towing or climbing steep grades.

• Approximate capacity: 6.0 quarts with filter
• Level verified hot after a brief run-in
• Cap and drain plug torque checked to spec

Dealer oil changes use GM dexos1 oil, an ACDelco filter, and include a documented multi-point inspection that many quick-lubes don’t bundle.

At Larry H. Miller Chevrolet Murray, your Suburban receives OEM-spec parts, oil-life reset, and service records that support warranty claims. Quick-lube shops may cost less for basic service, but verify that oil and filters meet GM specs.

• OEM-spec dexos1 oil and ACDelco filter
• Multi-point inspection and fluid top-offs included
• Digital records for warranty support and resale

Skipping required oil changes can jeopardize warranty coverage if you can’t show maintenance was done per the GM schedule.

Keep receipts and digital records, and follow the Oil Life Monitoring system or the owner’s manual intervals. Warranty work generally requires documentation from a qualified facility and proof of OEM-spec oil and filter use.

• Maintain service records and receipts
• Use GM-spec dexos1 oil and ACDelco filter
• Schedule service and keep documentation

Full synthetic 5W-30 meeting GM dexos1 offers better high-temp stability and cold-start flow than conventional or blend for the 2013 Chevrolet Suburban.

That matters in Utah’s temperature swings, towing, and stop-and-go traffic. While blends improve over conventional, full synthetic typically resists oxidation and shear longer, supporting the Oil Life Monitoring system targets.

• GM requirement: dexos1-certified 5W-30 oil
• Full synthetic improves protection and longevity
• Choose OEM-spec oil to preserve performance

Your 2013 Chevrolet Suburban service begins with a VIN check to confirm engine configuration and parts. We drain the used oil, replace the crush washer as needed, and install an OEM ACDelco filter. Then we fill with GM-spec dexos1 5W-30, verify the dipstick level, and reset the Oil Life Monitoring system. A multi-point inspection follows: brakes, tires, suspension, battery, and visible leaks. We top off fluids, set tire pressures for load and season, and road-test as appropriate. Documentation is added to your service history for warranty support and resale confidence. Ready to go? View open bays and schedule service now.

For most 2013 Chevrolet Suburban V8 engines, the OEM specification is SAE 5W-30 oil that meets GM dexos1. The 6.0L configuration typically requires about 6.0 quarts with a new filter. We install an OEM ACDelco filter (PF48E or PF63 as equipped; verified by VIN) to ensure correct bypass and sealing. Under normal driving, plan for oil service about every 7,500 miles or 12 months, or as directed by the Oil Life Monitoring system; for severe duty such as towing, dusty roads, or frequent short trips, shorten to roughly 3,000–5,000 miles. Bring your 2013 Chevrolet Suburban to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

We serve drivers across the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy. Utah’s mix of cold mornings, summer heat, canyon climbs, and occasional dust means your Suburban’s oil must handle cold-start pumpability and high-load temperatures. Our technicians use dexos1 5W-30 to balance flow and protection for highway commutes and towing. Visit us at 5500 S State St, Murray, UT 84107. Check service specials and lock an appointment time in our schedule service portal; you’ll see live availability and pricing before you arrive.