2010 Chevrolet Silverado-1500 Oil Change in Murray, UT

Most owners pay between $79 and $129 depending on engine, oil type, and applicable coupons.

Pricing at Larry H. Miller Chevrolet Murray is up-front and reflects OEM-spec oil and a Chevrolet-approved filter for the 2010 Chevrolet Silverado-1500. Your exact total varies by engine option and whether you choose full synthetic. Check our current service specials and book online to lock in your quote.

• Price varies by engine (V6 vs. V8) and oil type (synthetic vs. blend)
• Includes OEM-spec oil/filter, disposal, and multi-point inspection
• View offers on our service specials page

Plan for about 45–60 minutes for a standard dealership oil change.

Most 2010 Chevrolet Silverado-1500 services are completed in under an hour at our Murray facility, allowing time for check-in, the oil change, and a multi-point inspection. Add a few minutes if you request a tire rotation or additional diagnostics. You can schedule service to choose a time that fits your day.

• Typical bay time: 30–40 minutes; total visit: ~45–60 minutes
• Extra time for rotations, filters, or software updates
• Use our online scheduler for the quickest check-in

Change oil about every 7,500 miles or 12 months, or when the Oil Life Monitor prompts; severe Utah use may be 3,000–5,000 miles.

The 2010 Chevrolet Silverado-1500 uses GM’s Oil Life Monitor to tailor intervals to your driving. Towing up Parley’s, dusty job sites, and stop‑and‑go along the Wasatch Front can shorten intervals. We can read the OLM percentage at check-in and advise precisely for your usage.

• Follow the dash Oil Life Monitor (OLM) when it indicates service
• Severe duty: frequent towing, dust, short trips, extreme temps
• Document each visit for maintenance and resale value

Use SAE 5W-30 that meets GM’s specifications; full synthetic 5W-30 is commonly recommended and backward-compatible.

For the 2010 Chevrolet Silverado-1500, 5W-30 provides proper viscosity for cold starts in Utah winters and protection under load in summer. Many owners choose full synthetic 5W-30 for added high/low‑temperature stability. We’ll match oil spec to your engine and usage at check-in.

• Primary grade: SAE 5W-30 (full synthetic or synthetic blend)
• Meets GM performance standards for your model year
• We confirm specs by VIN and driving conditions

Expect about 6.0 quarts for most V8s; capacities range roughly 4.5–8.0 quarts depending on engine.

Capacity on the 2010 Chevrolet Silverado-1500 varies by engine option. The common 5.3L V8 typically uses about 6.0 quarts with filter. We verify by VIN and fill precisely to spec, then confirm level after a run cycle.

• Typical 5.3L V8: ~6.0 quarts (with filter)
• Some V6 engines: ~4.5 quarts; larger V8s may need more
• Capacity confirmed by VIN and owner’s manual spec

Dealer service includes OEM-spec oil/filter, a multi-point inspection, and service records that support warranty and resale.

Quick-lube shops can be faster and sometimes cheaper for basic conventional oil. At Larry H. Miller Chevrolet Murray, your 2010 Chevrolet Silverado-1500 gets Chevy-approved parts, factory service information, and updates checked at each visit. Choose what fits your priorities; we’re happy to quote both options.

• OEM-spec oil and Chevrolet-approved filter
• Complimentary multi-point inspection and fluid top-offs
• Digital records tied to your VIN for future reference

There are three types—conventional, synthetic blend, and full synthetic—with full synthetic offering the widest temperature protection.

Conventional oil meets baseline specs but breaks down faster under heat. Synthetic blends add stability for towing and summer climbs. Full synthetic 5W-30 typically provides the best cold-start flow for Murray winters and high-temp protection for the 2010 Chevrolet Silverado-1500.

• Conventional: budget-friendly, shorter intervals
• Blend: better oxidation resistance and cleanliness
• Full synthetic: strongest protection and detergent pack

Missing or delaying oil changes can jeopardize warranty coverage if you don’t follow the maintenance schedule and keep records.

Warranties require maintenance to be performed on time using oil that meets GM specifications. Keep your receipts and digital records for your 2010 Chevrolet Silverado-1500. Warranty work typically requires a certified facility; our team in Murray can service and document everything for your file.

• Follow the Owner’s Manual and OLM prompts
• Save invoices and digital records for proof of compliance
• Certified facilities help protect eligibility for coverage

Your 2010 Chevrolet Silverado-1500 works hard around the Salt Lake Valley, so its oil must handle cold starts, canyon grades, and summer heat. We serve the greater Salt Lake City area, including South Jordan, West Jordan, Midvale, and Sandy, with Chevy-trained technicians who see Silverado trucks every day. Local driving—stop-and-go along State Street, dusty worksites, and towing up the Wasatch—can shorten oil life. We inspect for leaks, check the Oil Life Monitor, and confirm specs by VIN so you leave with factory-correct oil and documentation for your records.

Find us at 5500 S State St, Murray, UT 84107. Get current offers on our service specials page, then schedule service at a time that fits your day. If your 2010 Chevrolet Silverado-1500 also needs a rotation or air filter, add it to the same visit for convenience.

We follow a consistent, Chevy-focused process for every 2010 Chevrolet Silverado-1500. After a quick intake and verification of your engine and oil spec, we drain the old oil, replace the drain gasket as needed, and install a Chevrolet-approved oil filter. We fill with the correct viscosity oil that meets GM performance standards, run the engine, check for leaks, and set the oil level precisely. A multi-point inspection reviews brakes, tires, battery, and fluids; we top off essentials and reset the Oil Life Monitor.

You’ll leave with a clear, itemized invoice and service records tied to your VIN—helpful for warranty support and resale. See current offers on our service specials page, and schedule service for your 2010 Chevrolet Silverado-1500 today.

The recommended oil grade for the 2010 Chevrolet Silverado-1500 is SAE 5W-30 that meets GM’s performance standards, with many owners selecting full synthetic for better cold-start pumpability and high-temperature stability. Typical capacity for common V8 engines is about 6.0 quarts with filter, though actual capacity varies by engine; we confirm by VIN. Under normal service, expect about 7,500 miles or 12 months between changes, but the Oil Life Monitor should guide timing based on your driving profile.

Severe-duty use in Utah—towing, frequent short trips, dusty conditions, or extreme temperatures—can reduce intervals to roughly 3,000–5,000 miles. We’ll tailor recommendations after inspecting your truck and reviewing your OLM percentage. Bring your 2010 Chevrolet Silverado-1500 to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.