2010 Chevrolet Corvette Oil Change in Murray, UT

Follow the Chevrolet Oil Life Monitoring System and service when it alerts; under severe driving in Utah, change sooner.

Your 6.2L V8 benefits from timely service to protect bearings, chains, and valvetrain during hot climbs and cold starts along the Wasatch Front. If you tow, drive short trips, or see dusty conditions, plan more frequent changes. Our advisors in Murray can review your usage and schedule accordingly.

• Oil Life Monitor guidance helps match your real driving
• Severe duty: frequent cold starts, dust, towing, or stop-and-go
• Book online to match your schedule: schedule service

Use engine oil that meets GM’s specification for your 6.2L V8 and the viscosity listed in the owner’s manual; we install OEM-spec full synthetic when required.

Chevrolet engineers validated specific oil formulations for this high-output engine to protect at 5,900 rpm and during spirited drives. Bring your Corvette to our Murray service center and we’ll verify the correct spec by VIN, then document it on your repair order.

• GM-spec oil matched to your engine code: 8VNAG6.2
• OEM-quality filter for proper flow and filtration
• See discounts before you book: service specials

GM sets the exact capacity for the 8VNAG6.2 V8; we fill to the factory spec and confirm on the dipstick.

Capacity depends on your specific engine configuration and filter replacement. Our technicians reference GM service data for your Corvette, add the correct quantity, and verify hot and cold levels for accuracy. This protects high-performance lubrication at speed and idle.

• Capacity verified by VIN and GM service information
• Final level confirmed on the dipstick after warm-up
• Book a precise fill in Murray: schedule appointment

Yes — dealer oil changes include OEM-spec oil and filter, a multi-point inspection, and digital service records that help preserve warranty coverage.

With a high-performance, rear-wheel-drive coupe like the Corvette, correct oil and filter selection matters. At Larry H. Miller Chevrolet Murray, factory-trained technicians service your 6.2L V8 and check related systems that affect reliability and performance. You get clear documentation for future resale or warranty needs.

• OEM-spec oil/filter installed to GM requirements
• Multi-point inspection and fluid top-offs included
• Service history stored in your GM vehicle record

Skipping or exceeding the factory oil-change schedule can jeopardize warranty coverage; Chevrolet requires documented maintenance compliance.

Keep receipts and records that show oil and filter meeting GM specs at the prescribed times or Oil Life Monitor prompts. Warranty work generally requires service that follows OEM procedures, and our Murray team provides digital documentation for your file.

• Maintain records to show proper intervals and oil spec
• Dealer documentation supports warranty review
• Easy online booking: schedule service

Full synthetic offers the strongest protection and longest life; blends are mid-tier; conventional is basic and breaks down fastest under heat.

High-revving V8s generate heat and shear that benefit from synthetic oil’s stability, especially on Utah’s mountain grades and summer days. We’ll match oil type to GM’s specification and your driving profile so you balance protection and cost effectively.

• Full synthetic: best high-temp and cold-start performance
• Blend: improved protection over conventional
• Conventional: budget choice for light-duty use

Plan for a single visit; most oil changes are completed the same day at Larry H. Miller Chevrolet Murray.

We coordinate appointments to minimize wait time and keep your day moving, with options to drop off and receive updates by text. While we service your vehicle, technicians also complete a multi-point inspection to catch small issues early.

• Same-day appointments subject to availability
• Text updates and clear approval steps
• Reserve your slot: schedule now

Pricing is provided up front before you book at Larry H. Miller Chevrolet Murray, with parts and labor itemized online.

Total cost depends on the required GM oil specification, filter, and any additional services you approve after inspection. Check current offers for added value, then lock in your time using our online scheduler.

• Transparent estimates before you confirm
• View deals: service specials
• Book securely: schedule service

Our service team supports performance-minded owners across South Jordan, West Jordan, Midvale, and Sandy with careful oil service tailored to the 2010 Chevrolet Corvette. Utah driving mixes freeway commutes with canyon climbs and winter cold starts, which stress lubricants and filters. Factory-trained technicians install the correct GM-spec oil and confirm levels under operating temperature for reliable lubrication at idle and high rpm. We also document every visit to preserve a clean maintenance history for future resale or warranty review. Visit our state-of-the-art facility at 5500 S State St, Murray, UT 84107. To plan your visit and minimize downtime, use our online tool to reserve a time that fits your week.

Directions and quick booking are a click away. View current offers to make the most of your visit, then choose a convenient slot that aligns with your schedule and driving needs in the Salt Lake City area.

Schedule service or review service specials before you arrive.

The 2010 Chevrolet Corvette features a 6.2-liter V8 (engine code 8VNAG6.2) designed for strong power delivery and rapid revs. For oil, always use a lubricant that meets the GM specification and viscosity listed in your owner’s manual. Our advisors verify the correct oil by VIN, install an OEM-quality filter for proper flow and filtration, and set the level precisely after warm-up. If your driving includes frequent cold starts, dusty roads, mountain passes, or extended idling, consider shorter change intervals than normal-service guidance for added protection.

We keep your service records on file and provide a detailed invoice noting the oil specification and filter used. This supports consistent care over time and informed decisions at your next visit. Bring your 2010 Chevrolet Corvette to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.

Schedule service anytime.

Every oil change is completed by factory-trained technicians who follow GM procedures. We begin by confirming the correct GM oil specification and filter for your vehicle, then safely drain the old oil, replace the filter, and add fresh OEM-spec oil. After setting the level, we reset the Oil Life Monitor and complete a multi-point inspection to spot leaks, worn belts, or other concerns early. Fluids are topped off and tire pressures checked to support balanced handling and tire wear.

Before you arrive, check our current offers to see if any apply to your visit. You’ll receive a clear, itemized invoice and digital service record for your 2010 Chevrolet Corvette. For efficiency and convenience in the greater Salt Lake City area, choose a time that fits your day and we’ll handle the rest. Ready to book? Use our secure scheduler to reserve your spot.

Schedule service or see service specials now.