2010 Chevrolet Avalanche Oil Change in Murray, UT

An oil change for a 2010 Chevrolet Avalanche costs {{vehicle.real_oil_change_price_range_usd}} at Larry H. Miller Chevrolet Murray, with up-front pricing.

This range reflects OEM-spec oil and a quality Chevrolet filter installed by factory-trained techs in Murray. Your total may vary based on oil type and any additional maintenance you approve. Check our current service specials and lock in a time that fits your day using our online schedule service tool.

• Price includes OEM-spec oil and Chevrolet-approved filter
• Multi-point inspection and fluid top-offs are typically included
• See offers on our service specials page

Plan for about {{service.duration_minutes}} minutes for a dealership oil change appointment.

This window covers check-in, the oil and filter service, and a multi-point inspection suited to Utah driving. Actual time can vary slightly with shop volume or if you request additional work. To minimize wait time, reserve a slot with our online schedule service tool.

• Typical visit length: {{service.duration_minutes}} minutes
• OEM-spec parts and fluids installed by certified technicians
• Book ahead online to streamline your visit

Follow the factory interval of {{vehicle.oem_oil_interval_miles}} miles, and shorten intervals under severe-use conditions in {{rooftop.climate_context}}.

Driving in the Wasatch Front can mean cold starts, altitude changes, dust, and towing—factors that justify earlier oil changes to protect the 5.3L V8. If you do frequent short trips or trailer duty, consider servicing sooner than the standard interval. When in doubt, our advisors can review your habits and recommend a precise schedule.

• Factory interval: {{vehicle.oem_oil_interval_miles}} miles
• Severe duty: service sooner due to {{rooftop.climate_context}}
• Documented services help preserve warranty compliance

The OEM specification is {{vehicle.oem_oil_spec}} for the 2010 Chevrolet Avalanche.

Using oil that meets Chevrolet’s spec helps ensure proper cold-flow in winter and film strength during hot, high-load climbs on I‑215 and mountain passes. We stock the correct oil and a Chevrolet-approved filter for your Avalanche and verify the fill with a post-service inspection.

• Meets GM/Chevrolet requirements: {{vehicle.oem_oil_spec}}
• Optimized for Utah temperature swings and towing
• Installed with a Chevrolet-approved oil filter

The 2010 Chevrolet Avalanche oil capacity is {{vehicle.oil_capacity_quarts}} quarts with a filter change.

Capacity can vary by engine code and pan design, so our technicians confirm the fill level after service. We add the correct amount of OEM-spec oil, run the engine, and recheck to ensure proper level before you leave our Murray service drive.

• Fill quantity: {{vehicle.oil_capacity_quarts}} quarts (with filter)
• Level verified after a warm-up and cool-down
• Disposal of used oil and filter included

Yes—dealer oil changes include OEM-spec oil/filter, a documented multi-point inspection, and service records that support warranty coverage.

Quick-lube shops can be convenient, but they may not use Chevrolet-approved oil or filters. At our Murray facility, your Avalanche gets factory-spec fluids, torque procedures, and a comprehensive inspection tailored to Utah driving. You decide what’s best; we focus on long-term engine protection and clear documentation.

• OEM-spec oil and Chevrolet-approved filter installed
• Multi-point inspection and fluid top-offs included
• Digital records tied to your VIN for future service

Skipping required oil changes can affect coverage related to lubrication failures per {{rooftop.warranty_terms.oil_change}}.

To protect your warranty, follow the Chevrolet maintenance schedule and keep receipts or digital records. Warranty work generally requires documentation and is best supported by service performed at a certified facility like ours in Murray. If you’re unsure about timing, ask our advisors to review your driving conditions.

• Follow the factory schedule and keep service records
• Certified service supports warranty validation
• Book ahead via our schedule appointment page

Full synthetic offers the strongest high/low‑temperature protection, blends are mid‑range, and conventional provides the least resistance to breakdown.

In Utah’s climate, full synthetic maintains better cold‑start pumpability and heat stability on canyon grades. Chevrolet’s recommendation for your Avalanche is {{vehicle.oem_oil_spec}}, which we stock in Murray. If you tow, idle frequently, or drive short trips, full synthetic is typically the safest choice for long-term engine health.

• Chevrolet recommendation: {{vehicle.oem_oil_spec}}
• Full synthetic resists oxidation and volatility best
• Consult our advisors to match oil to your duty cycle

Your 2010 Chevrolet Avalanche receives a methodical, OEM-aligned service process in Murray. We verify concerns, protect paint with fender covers, and drain the old oil fully. A Chevrolet-approved filter is installed, then we add the correct amount of factory-spec oil and torque the drain plug to spec. After start-up, we check for leaks, confirm the level, and perform a multi-point inspection tailored to Utah conditions—brakes, tires, battery, and undercar components. Fluids are topped off and tire pressures set. Per {{rooftop.warranty_terms.oil_change}}, we document work to support warranty compliance. Ready to go? View service specials, then schedule service or call {{rooftop.phone}}.

We serve the greater Salt Lake City area—South Jordan, West Jordan, Midvale, Sandy, and nearby communities—with oil changes that account for {{rooftop.climate_context}}. Cold-start pumpability matters in winter; dust and elevation changes demand robust detergency and film strength, especially when towing or commuting on I‑15 and I‑215. With {{rooftop.certified_tech_count}} certified technicians and {{rooftop.years_in_operation}} years supporting local Chevy drivers, we match oil choice and interval to your use. Find us at 5500 S State St, Murray, UT 84107. Have a tight schedule? Secure a time online: schedule service. Need an offer? See service specials. We’re ready to keep your Avalanche running smoothly.

For accurate protection, we install oil that meets Chevrolet’s factory specification: {{vehicle.oem_oil_spec}}. The fill quantity is {{vehicle.oil_capacity_quarts}} quarts with a filter change, verified after a warm-up to ensure the correct level. The recommended maintenance interval is {{vehicle.oem_oil_interval_miles}} miles under normal use, adjusted sooner for severe duty in {{rooftop.climate_context}}. We use a Chevrolet-approved oil filter and review any oil-related notes or bulletins applicable to your engine family to address concerns proactively. Bring your 2010 Chevrolet Avalanche to Larry H. Miller Chevrolet Murray in Murray for an OEM-spec oil change — schedule service.